Pico Technology PP877 Oscilloscope Adapter, For Use With Oscilloscope

  • RS 제품 번호 898-6839
  • 제조사 부품 번호 PP877
  • 제조업체 Pico Technology
참조 문서
제정법과 컴플라이언스
COO (Country of Origin): GB
제품 세부 사항

Pico Three Axis Accelerometer and Oscilloscope Interface PP877

Pico Technology supplies accelerometers that connect to an oscilloscope for measuring noise and vibration. The Pico PP877 is a MEMS-based three-axis accelerometer and oscilloscope interface. It is supplied with 3 short BNC to BNC cables which plug directly into any PicoScope oscilloscope with 3 or more analog channels. The PP877 is particularly recommended for use with high-resolution oscilloscopes such as the PicoScope 4000 Series, in order to take advantage of their increased sensitivity.

± 5 g measurement range (measurable acceleration)
DC to 350 Hz vibration frequency range
Output BNC 0-2 V DC coupled
Output scaling 99 to 122 mV/g
0 g output (all axes) 0.85 to 1.15 V
BNC overvoltage protection 30 V
Shock survivability (sensor head) 10,000 g
Thread mounting (sensor) " x 28 UNF
Temperature range (operating) sensor head -40 to +85 °C
Dimensions 105 x 65 x 27 mm (sensor interface including BNCs), 12 mm x 18 mm diameter (magnet, including fitted grub screw)
Weight 120 g (interface), 80 g (vibration sensor)



Supplied with

Mounting magnet, BNC to BNC cables (x3), battery (lithium primary cell) CR123(A)

Accessory Type Three-Axis Accelerometer Kit
For Use With Oscilloscope
일시 품절-다음 입고 날짜는 17/06/2020 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
단가 Each
(exc. VAT)
1 +