Digilent Oscilloscope Adapter BNC Adapter Board, Model 410-263 for use with Analog Discovery 2

  • RS 제품 번호 134-6460
  • 제조사 부품 번호 410-263
  • 제조업체 Digilent
참조 문서
제정법과 컴플라이언스
ROHS 준수
제품 세부 사항

Discovery 2 USB PC Multi-Function Instrument

The Analogue Discovery 2 is a USB oscilloscope and multi-function instrument that allows users to measure, generate, record and control mixed-signals of all kinds. The optional Discovery BNC Adapter Board provides standard BNC probe connections. Discovery 2 is aimed at engineering students, hobbyists and electronics enthusiasts who can download tutorials and other information from: https://reference.digilentinc.com/reference/instrumentation/analog-discovery-2/start

• 2-channel PC USB 14-bit 100Msps Digital Oscilloscope
• 2-channel 14-bit 100Msps Arbitrary Function Generator
• Stereo audio headphone/speaker amplifier
• 16-channel 100Msps Digital Logic Analyzer
• 16-channel 100Msps Pattern Generator
• 16-channel Virtual Digital I/O including buttons, switches and LEDs
• 2 x I/O Digital Trigger signals for linking multiple instruments
• Single-channel AC/DC Voltmeter
• Network Analyzer: 1Hz to 10MHz Bode, Nyquist, Nichols transfer diagrams
• Spectrum Analyzer: Power spectrum and spectral measurements (noise floor, SFDR, SNR, THD, etc.)
• Digital Bus Analyzers for SPI, I²C, UART and Parallel ports
• 2 x Programmable Power Supplies (0 to +5V, 0 to -5V)
• WaveForms 2015 (Mac, Linux and Windows Compatible) software

RS Product Codes

134-6480 410-321 Analogue Discovery 2 Instrument Kit
134-6460 410-263 Analogue Discovery BNC Adapter Board

Supplied with

Discovery 2 Kit: Project box, USB cable, 2 x 15 flywire signal cable assembly, 5-pack of 6-pin male headers, ferrite cable snap-on

Digilent Oscilloscope BNC Adapter Board

The Digilent oscilloscope BNC adapter board is designed to use with the Analogue Discovery 2 tool to enable the use of standard BNC terminated test leads and probes. It has BNC terminations to each of the two oscilloscope channels on the Analogue Discovery. Each channel of the oscilloscope can be selected as AC or DC, coupled by adjusting the jumper that is located behind that channel's BNC input connector.

Features and Benefits

• standard BNC interface to BNC terminated test leads and oscilloscope probes
• Selectable AC and DC coupling to oscilloscope probes
• Selectable 50ohm or 0ohm output impedance on Arbitrary Waveform Generator (AWG) channels

사양
속성
Adapter Type BNC Adapter Board
For Use With Analog Discovery 2
Model Number p 410-263
76 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
25,982.65
(exc. VAT)
수량
한(1)개당
1 +
₩25,982.65