Non-Isolated DC-DC Converter, 48V dc Output, 600mA

  • RS 제품 번호 891-3409
  • 제조사 부품 번호 SCD30S48-DN
  • 제조업체 SolaHD
참조 문서
제정법과 컴플라이언스
COO (Country of Origin): DE
제품 세부 사항

SCD Series, Industrial DC to DC Converter

The SCD series encapsulated converters have been designed to power industrial control instrumentation devices and equipment in applications where the use of AC power is not possible. They have high reliability and tight regulation on even the most difficult of factory-floor conditions.Easy-to-install DIN Rail and chassis mounting makes these units extremely user friendly and helps to reduce instillation time and costs. The terminals have been designed to not only be easy to wire but also easy to access. Various options are available covering a wide range of voltages.

These units work by regulating the voltage making them ideal for sensitive equipment run from battery power. This can be important as a 24 Vdc battery can operate from as high as 30 Vdc at full charge and dip below 22 Vdc under heavy loads. These units will stabilise the voltage variation for equipment not designed to operate under those conditions.

They can also be used to convert commonly available dc voltages form industrial machinery and equipment, such as 24 Vdc, and convert them to other dc voltages that may be required by specific equipment being used within the same vicinity.

DIN Rail or Chassis mount by removing DIN clips
Rugged, encapsulated design to resist environment
IP20 protection
Wide 20 to 72 Vdc input range
M3 screw clamp terminations
Simple snap-on for DIN Rail TS35/7.5 or TS35/15
Galvanic isolation
Five year limited warranty

Sola HD Converters

Input Voltage Range 20 → 72 V dc
Output Voltage 48V dc
Output Current 600mA
Power Rating 30W
Mounting Type Chassis Mount, DIN Rail Mount
Number of Outputs 1
Length 120mm
Width 65mm
Depth 33mm
Minimum Temperature -25°C
Maximum Temperature +65°C
Line Regulation ≤0.5%
Application Harsh Environment, Industrial, Remote Site, Telecom
Protection Features Over Current Protection
Weight 390g
Ripple And Noise ≤1 (Ripple) %, ≤2 (Noise) %
Regulator Type Switched Mode Power Supply
MTBF 800000h
Power Signal Conversion Type DC-DC
Load Regulation ≤0.5%
Special Features DIN Rail or Chassis Mount by Removing DIN Clips, Five Year Limited Warranty, Galvanic Isolation, IP20 Protection, Rugged Encapsulated Design to Resist Environment
Standards Met CE, CRUus, CULus
Series SCD
Holdup Time >10ms
일시 품절-다음 입고 날짜는 03/12/2020 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 로 연락주세요.
단가 Each
Was ₩311,381.05
(exc. VAT)
1 +