A4 316 Stainless Steel Mudguard Washers, M8
- RS 제품 번호:
- 660-4774
- 제조업체:
- RS PRO
153 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 50 백 1개
₩18,553.024
| Bag(s) | Per Bag | 한팩당* |
| 1 - 4 | ₩18,553.024 | ₩370.854 |
| 5 - 9 | ₩17,809.593 | ₩355.329 |
| 10 - 39 | ₩17,066.161 | ₩341.53 |
| 40 - 199 | ₩16,697.032 | ₩334.631 |
| 200 + | ₩13,742.278 | ₩274.259 |
| *다른 단위에 대한 가격 표시 | ||
- RS 제품 번호:
- 660-4774
- 제조업체:
- RS PRO
제정법과 컴플라이언스
- COO (Country of Origin):
- CN
제품 세부 사항
RS PRO Plain Stainless Steel Mudguard Washer, M8 x 30 mm, 1.5 mm Thickness
Installing a bolt or screw and want to make sure the load is evenly distributed? Use this RS PRO mudguard washer. It's made of A4 316 stainless steel, so it's highly corrosion-resistant. This makes it suitable for use in marine environments. The material is also tough, so it will remain shiny and dent-free for a long time. Its thickness of 1.5 mm means it won't easily deform, so you can count on it to protect your surfaces from tightly screwed nuts.
The mudguard washer has an 8.4 mm internal hole diameter, so it's suitable for use with M8 bolts or screw fittings. Its outside diameter of 30 mm fully covers the excess of a fixing.
The mudguard washer has an 8.4 mm internal hole diameter, so it's suitable for use with M8 bolts or screw fittings. Its outside diameter of 30 mm fully covers the excess of a fixing.
Features and Benefits
- Plain finish
- For screw/bolt size of M8
- Inside diameter of 8.4 mm
- Stainless steel material
- Outside diameter of 30 mm
- A4 316 stainless steel type
- Thickness of 1.5 mm
- Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 electrostatic control standards
사양
속성 | 값 |
|---|---|
| For Screw/Bolt Size | M8 |
| Washer Type | Mudguard |
| Inside Diameter | 8.4mm |
| Outside Diameter | 30mm |
| Material | Stainless Steel |
| Stainless Steel Type | A4 316 |
| Finish | Plain |
| Thickness | 1.5mm |