- RS 제품 번호:
- 511-9727
- 제조업체:
- RS PRO
- RS 제품 번호:
- 511-9727
- 제조업체:
- RS PRO
참조 문서
제정법과 컴플라이언스
해당 안됨
제품 세부 사항
RS PRO Carbide-Tipped SDS Drill Bit, 14 mm x 390 mm
Need to drill into hard or abrasive materials like stone and cement? Use this RS PRO Slotted Drive System (SDS) drill bit. It has a carbide tip, which allows for sharp and accurate drilling, even into masonry and concrete.
Carbide tools are highly resistant to abrasion and can withstand very high temperatures. This makes them ideal for drilling through tough materials. The strength and durability of the carbide ensure you'll still end up with a sharp tip on the drill bit, as well as a clean, smooth finish on the cut.
This drill bit has spiral fluting along the lead, resulting in a continuous and efficient drilling motion. The flutes allow any debris to remove itself from the cutting path, so you can drill unimpeded. For a safe and secure fit, use this drill bit with an SDS-MAX fitting shank.
Carbide tools are highly resistant to abrasion and can withstand very high temperatures. This makes them ideal for drilling through tough materials. The strength and durability of the carbide ensure you'll still end up with a sharp tip on the drill bit, as well as a clean, smooth finish on the cut.
This drill bit has spiral fluting along the lead, resulting in a continuous and efficient drilling motion. The flutes allow any debris to remove itself from the cutting path, so you can drill unimpeded. For a safe and secure fit, use this drill bit with an SDS-MAX fitting shank.
Features and Benefits
• Diameter of 14 mm
• SDS drill bit type
• Not hammer capable
• Carbide-tipped material
• Overall length of 390 mm
• SDS-Max type
• SDS drill bit type
• Not hammer capable
• Carbide-tipped material
• Overall length of 390 mm
• SDS-Max type
사양
속성 | 값 |
---|---|
Material | Carbide Tipped |
Drill Bit Type | SDS Max Drill Bit |
Diameter | 14mm |
Overall Length | 390 mm |
Drilling Application | Masonry |