RawlPlug Black Rubber, Steel Wall Plug, 26.1mm Length, 10mm Fixing Hole Diameter
- RS 제품 번호:
- 279-127
- 제조사 부품 번호:
- R-RNT-M5X30
- 제조업체:
- RawlPlug
13 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 20 백 1개
₩18,785.886
| Bag(s) | Per Bag | 한팩당* |
| 1 + | ₩18,785.886 | ₩940.071 |
| *다른 단위에 대한 가격 표시 | ||
- RS 제품 번호:
- 279-127
- 제조사 부품 번호:
- R-RNT-M5X30
- 제조업체:
- RawlPlug
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- GB
제품 세부 사항
Rawlnut™ Multipurpose Fixing
The Rawlnut™ multi-purpose fixing consists of a rubber sleeve with a flange at one end and a bonded-in nut at the other.
Features and Benefits.
- Flexi Plug with Screw Fixings.
- Lightweight to medium weight fixing.
- Excellent for use with unknown substrates and holes.
- Vibration and corrosion resistant.
- Rubber flange fits flush at the drilled holes surface.
- Made from synthetic rubber with a metal screw fitting.
- Bonded insert
- Guaranteed tight fixing.
Typical Masonry Fixings Applications.
- Picture hanging.
- Lighting.
- Shelving.
- Trunking.
- Cable conduits and wires.
Material the Flexi Plug is Compatible with?
- Solid brick.
- Hollow brick.
- Vertically perforated clay block.
- Lightweight concrete block.
- Hollow lightweight concrete block.
- Aerated concrete block.
- Plasterboard.
- Chipboard.
Flexi Plugs Available?
- Stock numbers 279098, M4 Wall Plug, length 20 mm, fixing hole diameter 8 mm, fixing thickness 4 mm.
- Stock number 279105, M4 Wall Plug, length 30 mm, fixing hole diameter 8 mm, fixing thickness 14 mm.
- Stock number 279111, M5 Wall Plug, length 20 mm, fixing hole diameter 10 mm, fixing thickness 5 mm.
- Stock number 279127, M5 Wall Plug, length 30 mm, fixing hole diameter 10 mm, fixing thickness 16 mm.
- Stock number 279133, M5 Wall Plug, length 40 mm, fixing hole diameter 10 mm, fixing thickness 30 mm.
How to use the Flexiplug?
- Drill the hole (for solid material drill the hole to the length of the screw and fixture thickness).
- Clean out the drilled hole removing any sharp edges that may damage the fixing.
- Insert the fixing up to the flange of the fixing.
- Put the fixture into position, insert the screw and start to tighten. This will compress the fixing sleeve and you will have a secure fitting.
- Never overtighten the screw fixing.
- This works well in uniform and irregular shaped drilled holes.
사양
속성 | 값 |
|---|---|
| Colour | Black |
| Length | 26.1mm |
| Material | Rubber, Steel |
| Fixing Hole Diameter | 10mm |