XY2-CE Cable Switch, Right Side, 50m, 2NC

참조 문서
제정법과 컴플라이언스
ROHS 준수
제품 세부 사항

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches

These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.

Standards

EN/ISO 13850:2006

사양
속성
Range Preventa
Series XY2-CE
Reset Button Yes
Normal State Configuration 2NC
Mounting Orientation Right Side
Maximum Rope Span 50m
Maximum Current 3 A ac, 270 mA dc
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Number of Cable Entries 1
Conduit Entry PG13.5
Size of Cable Entries PG13.5
Maximum Operating Temperature +70°C
Depth 105mm
Width 229mm
Length 142mm
E-Stop Button No
Dimensions 142 x 229 x 105 mm
IP Rating IP65
Minimum Operating Temperature -25°C
1 <재고있음> 5-9영업일내 홍콩 발송
3 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
242,373.50
(exc. VAT)
수량
한(1)개당
1 +
₩242,373.50