RS PRO Low Density ESD Foam 305mm(W)x 305mm(L)
- RS 제품 번호:
- 815-3512
- 제조업체:
- RS PRO
일시 품절-다음 입고 날짜는 30/04/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 9 백 1개
₩109,726.064
| Bag(s) | Per Bag | 한팩당* |
| 1 - 4 | ₩109,726.064 | ₩12,191.593 |
| 5 + | ₩90,305.415 | ₩10,033.743 |
| *다른 단위에 대한 가격 표시 | ||
- RS 제품 번호:
- 815-3512
- 제조업체:
- RS PRO
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- GB
제품 세부 사항
RS Pro Low Density ESD Foam
RS Pro low density ESD foam provides pin and component protection to sensitive components. With its ESD properties you’re safe to put any component on this foam. It’s an effortless foam so you can just push your component onto the foam and know it will stay secure and not tumble around in packaging. This foam is soft and flexible and could ideally be used as soft packaging.
Standards
This conductive foam meets the surface resistance required as per EN 61340-5-1 (tested per IEC 61340-2-3)
사양
속성 | 값 |
|---|---|
| Packaging Type | Low Density ESD Foam |
| Type | Foam |
| Colour | Black |
| Length | 305mm |
| Thickness | 6mm |
| Width | 305mm |
| Dissipative | No |
| Conductive | Yes |
| Static Shielding | Yes |
| Complies with EN 61340-5-1 | Yes |
| Surface Resistance | 1 x 10^2 → ≤ 1 x 10^5Ω |
| Volume Resistance | ≤ 2.5 x 10^2Ω |
| Tensile Strength | 70kPa |