Phoenix Contact 3-Way PTS 2.5-TWIN-PE Earth Terminal Block, 26 → 12 AWG Wire, Push In, Polyamide Housing
- RS 제품 번호:
- 708-1716
- 제조사 부품 번호:
- 3211935
- 제조업체:
- Phoenix Contact
430 <재고있음> 5-9영업일내 홍콩 발송
150 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당가격(5개가 1팩안에)
₩9,800.882
수량 | 한팩당 | 한팩당* |
5 + | ₩9,800.882 | ₩49,004.409 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 708-1716
- 제조사 부품 번호:
- 3211935
- 제조업체:
- Phoenix Contact
제정법과 컴플라이언스
- COO (Country of Origin):
- PL
제품 세부 사항
PTS 2.5 Ground Terminal Blocks
Angled conductor entry
Large space saving when used in concealed wiring systems
Equipped with four bridge shafts to offer a wide range of potential bridging options
Contact is made free from mechanical and electrical errors by simply snapping onto the DIN rail
Large space saving when used in concealed wiring systems
Equipped with four bridge shafts to offer a wide range of potential bridging options
Contact is made free from mechanical and electrical errors by simply snapping onto the DIN rail
Phoenix Contact Ground Terminal Block, 3 Way, 26 to 12AWG - PTS 2.5-TWIN-PE - 3211935
Use this ground terminal block from Phoenix Contact to safely earth cables on your printed circuit board (PCB). It efficiently discharges excess electricity to prevent magnetic fields from causing interference with other devices. The unit is simple to identify in a crowded set-up thanks to its green and yellow housing colours.
This easy-to-use terminal block uses a push-in connection method that calls for low insertion force. It accommodates both stranded and solid conductors ranging in size from 26 to 12AWG (American Wire Gauge), making it a versatile choice. For simple installation, the unit snaps onto a DIN rail without the need for specialised tools. The four bridging shafts offer a wide range of potential bridging options for enhanced flexibility in your electrical circuit design. Choose a ground terminal block like this one for electrical distribution boards or machine control systems.
This easy-to-use terminal block uses a push-in connection method that calls for low insertion force. It accommodates both stranded and solid conductors ranging in size from 26 to 12AWG (American Wire Gauge), making it a versatile choice. For simple installation, the unit snaps onto a DIN rail without the need for specialised tools. The four bridging shafts offer a wide range of potential bridging options for enhanced flexibility in your electrical circuit design. Choose a ground terminal block like this one for electrical distribution boards or machine control systems.
Meets IEC 60947-7-2 safety requirements for low-voltage switchgear
Polyamide (PA) housing offers electrical insulation for enhanced electrical safety
Meets UL 94-V0 flammability standards, meaning it's self-extinguishing in the event of a fire
Polyamide (PA) housing offers electrical insulation for enhanced electrical safety
Meets UL 94-V0 flammability standards, meaning it's self-extinguishing in the event of a fire
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
사양
속성 | 값 |
---|---|
Earth Block Type | PTS 2.5-TWIN-PE |
Wire Size | 26 → 12 AWG |
Colour | Green/Yellow |
Number of Ways | 3 |
Termination Method | Push In |
Housing Material | Polyamide |
Length | 49mm |
Width | 5.2mm |
Height | 50.5mm |
Maximum Operating Temperature | +130°C |
Minimum Operating Temperature | -60°C |