Weidmüller WDK Series Dark Beige Double Level Terminal Block, 2.5mm², Double-Level, Screw Termination
- RS 제품 번호:
- 779-598
- 제조사 부품 번호:
- 1021500000
- 제조업체:
- Weidmüller
1340 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당가격(10개가 1팩안에)
₩5,388.588
수량 | 한팩당 | 한팩당* |
10 + | ₩5,388.588 | ₩53,885.876 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 779-598
- 제조사 부품 번호:
- 1021500000
- 제조업체:
- Weidmüller
제정법과 컴플라이언스
제품 세부 사항
Double Deck
A 2 tier terminal, enabling higher density wiring on the rail. The WDK2.5 is a standard feed through while the WDK2.5V has a commoning bar connecting upper and lower tiers.,A 10 way jumper bar is available. End cover fits both terminals.
Features:
Continuous operating temperature: -50 °C to 120 °C
Material: Wemid
Material: Wemid
Approvals
CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR
Weidmuller Double-Level Terminal Block, 6kV Impulse Withstand Voltage, 30 To 12AWG Wire Size - WDK Series - 1021500000
Join one or two conductors with this double-level terminal block from Weidmuller. Its two wire feeds enable you to connect complex equipment and circuits without the need for separate modules. As it's made from a Wemid thermoplastic material, it insulates your components against electrical damage and provides effective resistance to heat and wear. This material is also flame-retardant for safety in the event of a fire. Its rated impulse withstand voltage of 6kV means it can handle powerful spikes in voltage.
Features & Benefits
• Wide operating temperature range between -60°C and +130°C for use in harsh conditions
• Snap-on fixing for quick installation on a DIN rail
• Screw terminals for the secure clamping of wires
• Accepts wire sizes between 30 and 12AWG for versatility
• Snap-on fixing for quick installation on a DIN rail
• Screw terminals for the secure clamping of wires
• Accepts wire sizes between 30 and 12AWG for versatility
Applications
• Industrial automation
• Process control
• HVAC systems
• Energy regulation
• Process control
• HVAC systems
• Energy regulation
What type of DIN rail is this terminal block suitable for?
This double-level terminal block fits onto standard TS35 DIN rails. This means you can use it on top-hat rails for applications such as industrial and motor control circuits.
The W series screw clamp terminals are suitable for Top Hat DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric Top Hat rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.
사양
속성 | 값 |
---|---|
Colour | Dark Beige |
Number of Levels | Double |
Series | WDK |
American Wire Gauge | 30 → 12AWG |
Termination Method | Screw |
Cable CSA | 2.5mm² |
Current Rating | 32A |
Voltage Rating | 400 V |
Minimum Operating Temperature | -50°C |
Maximum Operating Temperature | +120°C |