Phoenix Contact, TRIO-DIODE/12-24DC/2X10/1X20 Dual Redundancy Module, 24V dc Output Voltage, 20A Output Current
- RS 제품 번호 708-0438
- 제조사 부품 번호 2866514
- 제조업체 Phoenix Contact
TRIO DIODE Redundancy Module
Using the redundancy module, it is possible for two power supply units of the same type connected in parallel on the,output side to increase performance or for redundancy to be 100% isolated from one another.
Features and Benefits
100% decoupling of power supply units connected in parallel
Reliable signaling of redundancy, the floating signal contact and LED immediately indicate the loss of redundancy
Load currents up to 30 A supported
Easy installation by snapping onto the DIN rail
Reverse polarity protection
Typical Applications
The redundant systems are mainly used where the system places a high demand on operational reliability. The PSU must be big enough that the total current requirements of all loads are met by one power supply unit.
Switch Mode - Phoenix Contact Single Phase and Three Phase Power Supplies
A range of power supplies, which, based on its technical properties and competitive prices, is well suited for panel builders and standard machine production, replacements of existing power supplies or comparable applications.
| 속성 | 값 |
|---|---|
| AC or DC Input Voltage | Dc |
| Input Voltage | 24V dc |
| Output Voltage | 24 V dc |
| Output Current | 20 A |
| Type | Switch Mode |
| Height | 130mm |
| Width | 32mm |
| Series | TRIO-DIODE/12-24DC/2X10/1X20 |
| MTBF | 10000000h |
| Depth | 130mm |
| Minimum Temperature | -25°C |
| Mounting Type | DIN Rail Mount |
| Efficiency | >97% |
| Maximum Temperature | +70°C |
