Lascar Digital Voltmeter DC, LCD Display 3-Digits ±1 %, 44 x 21 mm

  • RS 제품 번호 365-6252
  • 제조사 부품 번호 EMV 1200
  • 제조업체 Lascar
참조 문서
제정법과 컴플라이언스
COO (Country of Origin): CN
제품 세부 사항

Lascar Digital Voltmeter

The Lascar digital voltmeter is an easy to mount, LCD digital panel meter. It can be installed by drilling a single, 5.5mm hole into the panel. The module is fitted to a panel by locating its screw-threaded stud through the hole. Subsequently, the washer is added followed by tightening the nut provided along with it. The connection of the module passes through the hollow stud into the target applications. The module features a 4 to 25V measurement range with 100mV resolution and is powered from the signal it is measuring. Finally, a rubber seal is included, providing splashproof protection for the unit when fitted to the meter during installation. Its full-scale reading ranging between 4VDC to 25VDC and supply voltage ranging between 3VDC and 50VDC.
Note: At voltages below 4VDC the LCD will display 'LO' and go blank. At voltages above 25VDC, the LCD will display 'HI'. Lascar, single hole fixing: LCD compact digital/virtual analogue indicators with common dimensions require a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash-proof protection for the units when fitted to the meter during installation. All the meters have an operating temperature range of 0°C to 50°C unless specified otherwise.

Features and Benefits

Single hole mounting
LCD digit height is 12.5mm/0.5in
Reverse polarity protection
2-wire operation
Number of digits are 3.5
Operating temperature ranging between 0°C and 50°C


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Current Type DC
Number of Digits 3
Display Type LCD
Cutout Height 44mm
Cutout Width 21mm
Depth 9mm
Meter Accuracy ±1 %
Analogue Effect Digits Only
Minimum Temperature 0°C
Maximum Temperature +50°C
132 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
(exc. VAT)
1 - 4
5 - 9
10 +