The RS PRO IDM73 is a compact, rugged and high performing digital multimeter. These handheld devices can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.
The highest measuring category allows measurements direct at the source of the low voltage installation. Features optical interface for transmitting measuring results to PCs.
RS PRO have a great range of meters that are RS approved meaning that they are great value for money and high quality you can rely on.
Handy and compact housing
Large-scale display
6000 display count
DCA μA
Data Hold
Min / Max function
Frequency Counter
Capacitance Measurement
Auto Power Off
Shock resistant (1 m drop)
Protective Holster with a tilt stand and lead storage
Large-scale display
True RMS reading on AC mode
DCA μA, A
ACA A (True RMS)
Optional RS-232 interface and software
DC and AC Voltages - up to 1000 V dc and 750 V ac
DC and AC Current - up to 10 Amps
Resistance and continuity checking - up to 200 MΩ
Diode - open circuit voltage up to 3 V
Capacitance - range from 6 nF to 6 mF
The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.
Ergonomically designed slim shape with one-handed operating knob and buttons. It just fits into the palm of your hand.
The IDM73 has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.
Batteries can be easily replaced by unscrewing only two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.
The LED display turns ON/OFF at the touch of a button, and automatically turns off to save battery life.
Pair of Test Leads
Battery (Installed)
Protective Holster
User Manual
Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the users manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
CAT. IV 600 V / CAT. III 1000 V
The RS Pro IDM72 is from the IDM70 series of high-performance digital multimeters. The IDM72 digital multimeter (DMM) is designed to test voltage, current, frequency, capacity and resistance. It features an optical interface for transferring measurement data to a PC.
The IDM72 is a compact handheld multimeter, ideal for using in your workshop or on-site. It is also battery-powered, which is great for portability. There is also a digital 6000 count LCD screen.
A robust plastic housing and supplied holster provides protection against drops from up to 4ft.
The IDM72 multimeter features and automatic power-off function, therefore preserving battery life.
When measuring your electronic circuit or battery, its important that you get an accurate reading. The IDM72 is RS Approved, meaning not only is it great value for money, but you can rely on its quality. It also comes with an impressive 3 year warranty.
Capacitance measurement
Frequency counter
True RMS reading on AC mode
DCA μA, A
Data Hold
Min / Max function
IDM72 multimeter
Test leads (red & black)
Battery
User manual
Protective holster
Dimensions - 158 x 76 x 38 mm
123-3242 (Non-calibrated)
123-3440 (RSCAL)
123-3441 (UKAS)
속성 | 값 |
---|---|
Multimeter Type | Handheld |
Absolute Maximum AC Current Measurement | 10A ac |
Absolute Maximum DC Current Measurement | 10A dc |
Absolute Maximum DC Voltage Measurement | 1000V dc |
Absolute Maximum Resistance Measurement | 60MΩ |
Absolute Maximum AC Voltage Measurement | 750V ac |
Absolute Maximum Capacitance Measurement | 6mF |
True RMS | Yes |
Maximum Frequency | 60MHz |
Display Type | LCD |
Model Number p | IDM72 |
DC Current Measurement Resolution | 0.1µA |
AC Current Measurement Resolution | 0.1µA |
Resistance Measurement Resolution | 100mΩ |
AC Voltage Measurement Resolution | 0.1mV ac |
DC Voltage Measurement Resolution | 0.1mV dc |
Capacitance Measurement Resolution | 1pF |
Weight | 400g |
Height | 164mm |
Best Resistance Measurement Accuracy | ±0.7% + 2 Digits |
Best Capacitance Measurement Accuracy | ±1.9% + 8 Digits |
Best AC Voltage Accuracy | ±0.9% + 5 Digits |
Best AC Current Accuracy | ±1.5% + 5 Digits |
Maximum Operating Temperature | +50°C |
Best DC Voltage Accuracy | ±0.5% + 2 Digits |
Dimensions | 82 x 44 x 164mm |
Safety Category Level | CAT III, CAT IV |
Minimum Operating Temperature | 0°C |
Battery Type | IEC 6F22, NEDA 1604, 9V |
Width | 44mm |
Best DC Current Accuracy | ±1% + 2 Digits |
Length | 82mm |
Battery Life | 300 h |
Safety Category Voltage | 600 V, 1000 V |