Fluke 772 Clamp Meter, 100mA dc

  • RS 제품 번호 669-3490
  • 제조사 부품 번호 Fluke 772
  • 제조업체 Fluke
참조 문서
제정법과 컴플라이언스
해당 안됨
COO (Country of Origin): CN
제품 세부 사항

Fluke Clamp Meter

The Fluke milliamp process clamp meter measures current up to 99.9mA DC. It saves time and money by measuring 4mA to 20mA signals five times faster than with traditional DMMs, and without breaking the loop. It can detach the clamp section of the meter and use it as a remote jaw, connected to the main body by an extension cable to make it easier to take measurements in tight spaces.
For details of the 771 process clamp meter see stock no. 287-642
Supplied with:
4 AA alkaline batteries, test lead set with integral prods and 2 crocodile clips test leads with integral grabber clips
soft carry case & instructions

Features and Benefits

Sources 4mA to 20mA signals for testing control system I/O or I/Ps
Simulates 4mA to 20 mA signals for testing control system I/O
Measures 4mA to 20mA signals with in-circuit measurement
Simultaneously measures mA in-circuit with 24V loop power for powering and testing transmitters
Source output signals in a linear ramp or 25% step output- Automatically change the 4mA to 20 mA output for remote testing
Power-saving features, auto-off, backlight timeout extend battery life
The scaled output provides a continuous mA signal that corresponds to the 4mA to 20mA signal measured by the mA clamp- Output mA signal enables a logging DMM or other device to record the 4mA to 20mA signal without breaking the loop
mA in/out- Simultaneously measures the mA signal with the clamp and source an mA signal- apply an mA input signal to a device and measure its 4mA to 20mA output on devices such as valves or mA isolators
Voltage output linear ramp or 25% step output Automatically change the voltage output for remote testing
Delivers 0.01mA resolution and sensitivity
Measurement Spotlight to illuminate hard to see wires in dark enclosure
Operating temperature ranges between -10°C and 50°C


Oil and gas
Food and beverages


IP40 rated

Absolute Maximum AC Current Measurement -, - A ac
Absolute Maximum DC Current Measurement 99.9mA dc
Model Number 772
DC Current Measurement Resolution 10uA
Best DC Current Accuracy ±1% + 5 Digits
Clamp Meter Type Milliamp Process Clamp
Battery Life 20 h
Jaw Capacity Busbars 4.5mm
Weight 420g
Height 41mm
Minimum Operating Temperature -10°C
Maximum Conductor Size 4.5mm
Functions Measured AC Current
Dimensions 248 x 76 x 41mm
Length 248mm
Width 76mm
Power Source Battery
Battery Type AA
Display Type LCD
Maximum Operating Temperature +50°C
일시 품절-문의: krenquiry@rs-components.com
단가 Each
(exc. VAT)
1 +