Mitutoyo 6in Digital Caliper 0.01 mm, Imperial

  • RS 제품 번호 432-025
  • 제조사 부품 번호 500-171-30
  • 제조업체 Mitutoyo
참조 문서
제정법과 컴플라이언스
해당 안됨
COO (Country of Origin): JP
제품 세부 사항

Mitutoyo-Absolute

Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model.

General Features:

Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish

All measuring surfaces are ground and lapped for high accuracy
Capable of measuring: inside, outside, depth and step
Storage Temp: -10°C to +60°C
Operating Temp: 0°C to +40°C

Electronic Features:

ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin point
ABS - Absolute feature re-sets the ’reference’ point of measurement of the instrument jaws
in./mm - Selects imperial or metric display
Origin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off

Note

Imperial/metric versions have thumbwheel where metric does not.
SPC output versions - A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section

Supplied with

SR44 Battery

Mitutoyo Digital Precision Caliper

The Mitutoyo 0 to 6in digital precision calliper is a highly accurate measuring instrument. It is enabled with a new age electromagnetic inductive sensor that repels dirt, oil, and water ensuring maximum accuracy. It has a function that starts the absolute-mode measurement without any zero-setting after it is switched on. The INC (incremental) measurement function enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement. The original position of the calliper can be set, or reset, with the origin' switch at any time. It has advanced functions like low battery alarm indication and carbide-tipped jaw that makes it ideal for various applications like measurement of rough-machined workpieces, castings, and grindstones.Note:Imperial/metric versions have thumbwheel where metric does not.SPC output versions -A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this sectionSupplied with SR44 Battery

Features and Benefits

Step-measurement capable Battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo's absolute scale The slider configuration features an ergonomic, thumb-friendly shape Range of 0in to 6in Resolution of 0.01mm Accuracy of ±0.001in Button-type silver oxide battery power supply High response speed Carbide-tipped jaws for outside and inside measurement Capable of measuring: inside, outside, depth and step All measuring surfaces are ground and lapped for high accuracy

Applications

Mechanical engineering Aerospace industries Steel and other metalwork industry

사양
속성
Caliper Type Digital
Capacity 150mm
Imperial or Metric Both
Display Type Digital
Accuracy ±0.001 in
Resolution 0.01 mm
3 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
314,963.10
(exc. VAT)
수량
한(1)개당
1 +
₩314,963.10