HellermannTyton HTWD-PD Grey Slotted Panel Trunking - Open Slot, W37.5 mm x D50mm, L2m, PVC
- RS 제품 번호:
- 144-6415
- 제조사 부품 번호:
- 185-43750 HTWD-PD-37.5X50-PVC-GY
- 제조업체:
- HellermannTyton
140 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당가격(20개가 1팩안에)
₩19,622.462
| 수량 | 한팩당 | 한팩당* |
| 20 - 180 | ₩19,622.462 | ₩392,466.497 |
| 200 + | ₩18,249.442 | ₩364,995.74 |
| *다른 단위에 대한 가격 표시 | ||
- RS 제품 번호:
- 144-6415
- 제조사 부품 번호:
- 185-43750 HTWD-PD-37.5X50-PVC-GY
- 제조업체:
- HellermannTyton
참조 문서
제정법과 컴플라이언스
- COO (Country of Origin):
- DE
제품 세부 사항
HelaDuct HTWD-PD wiring ducts are used to route and protect wires in control panels and switching systems.
Narrow slots suitable for small-diameter wires
Smooth, burr-free edges protect installers from injury and wires from damage
Fingers can be removed with no sharp edges at pre-notched snap-off points
Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration
Cover is flush with side of duct, allowing for tight, contiguous placement of ducts
Base perforation according to DIN EN 5008
Smooth, burr-free edges protect installers from injury and wires from damage
Fingers can be removed with no sharp edges at pre-notched snap-off points
Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
Duct covers are easy to mount and remove, yet hold securely even in a vertical position and under vibration
Cover is flush with side of duct, allowing for tight, contiguous placement of ducts
Base perforation according to DIN EN 5008
사양
속성 | 값 |
|---|---|
| Width | 37.5 mm |
| Depth | 50mm |
| Trunking/Chain Type | Slotted Panel Trunking |
| Colour | Grey |
| Material | PVC |
| Length | 2m |
| Slot Type | Open |
| Fire Behaviour | Self-extinguishing |
| Series | HTWD-PD |
| Standards Met | DIN EN 50085, UL 94 V-0 |