Kopex Enlarger Cable Conduit Fitting, Brass 20mm nominal size IP66

  • RS 제품 번호 738-8297
  • 제조사 부품 번호 EX/M20-M25/E
  • 제조업체 Kopex
참조 문서
제정법과 컴플라이언스
COO (Country of Origin): GB
제품 세부 사항

Thread Converters

A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.


It is not recommended to use two adapters together (joined to each other).


ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.

Kopex Ex-System

Fitting Type Enlarger
Nominal Size 20mm
Material Brass
Thread Size M20 to M25
IP Rating IP66
Minimum Operating Temperature -60°C
Maximum Operating Temperature +100°C
Hazardous Area Certification ATEX
10 <재고있음> 5-9영업일내 홍콩 발송
단가 Each (In a Pack of 5)
(exc. VAT)
5 - 45
50 - 245
250 +
*다른 단위에 대한 가격 표시