- RS 제품 번호:
- 725-9984
- 제조사 부품 번호:
- TCRGUNB
- 제조업체:
- Electrolube
현재 시스템 에러로 재고 수량 확인이 불가합니다. krenquiry@rs-components.com 에 문의하시거나 잠시후에 다시 시도해주시기 바랍니다.
추가완료!
단가 개당
₩27,981.328
수량 | 한팩당 |
1 - 4 | ₩27,981.328 |
5 - 9 | ₩26,863.593 |
10 + | ₩25,742.408 |
- RS 제품 번호:
- 725-9984
- 제조사 부품 번호:
- TCRGUNB
- 제조업체:
- Electrolube
제정법과 컴플라이언스
- COO (Country of Origin):
- GB
제품 세부 사항
Standards
RoHS Compliant (2002/95/EC)
Electrolube Dispensing Gun
Application
Thermal adhesives are a type of thermally conductive adhesive used to secure heat sinks and electronic components. Thermal adhesives are available in a number of mediums such as thermal paste, glue, tape and more. They work by creating a strong bond for heatsinks or electrical parts commonly via a two-part epoxy resin with thermal conductivity capabilities, drawing heat away from a device. Thermal adhesives are used in a variety of industries and applications such as:
• Heat sink bonding
• Potting/encapsulating sensors
• BGA die heat spreader interface
• Chip scale packages
• Power semiconductors
• Heat sink bonding
• Potting/encapsulating sensors
• BGA die heat spreader interface
• Chip scale packages
• Power semiconductors
How To Apply
Before applying, ensure surfaces are clean and free from grease, dust and contaminants. Insert the adhesive tube into the Electrolube application gun, which dispenses the product, providing efficient and accurate dispensing. Apply a thin layer of the adhesive to the components required for bonding, before leaving the product to cure for the recommended time of 24 hours as 20°C.
Note: Curing rate is dependent upon ambient conditions of temperature and humidity.
사양
속성 | 값 |
---|---|
Type | Adhesive Gun |
Product Capacity | 75ml |