RS PRO 1.75mm Transparent GLASSBEND 3D Printer Filament, 300g
- RS 제품 번호:
- 832-0633
- 제조업체:
- RS PRO
일시 품절-다음 입고 날짜는 15/07/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 개당
Was ₩30,313.393
귀하의 지불
₩16,869.522
| 수량 | 한팩당 |
| 1 + | ₩16,869.522 |
- RS 제품 번호:
- 832-0633
- 제조업체:
- RS PRO
제정법과 컴플라이언스
- COO (Country of Origin):
- NL
제품 세부 사항
RS 3D Printer Filament Glassbend
GLASSBEND is a crystal clear, strong, flexible and easy to print filament for 3D printing. These characteristics, together with the high degree of gloss, very low water absorption, practically no shrinkage or warping, very good interlayer adhesion and flame retardant properties make it a very special filament. The material is FCA (Food Contact Acceptable) approved. In short, a very diverse filament which can be used for many applications.
92% light transmission, so very bright
Strong and flexible
Very good interlayer adhesion
No ’wit-print’ at bow
Food Contact Acceptable
Almost no ”warping"
Strong and flexible
Very good interlayer adhesion
No ’wit-print’ at bow
Food Contact Acceptable
Almost no ”warping"
Recommended temperature for heated bed is ± 70-90˚C. Adhesion is possible on different surfaces.
GLASSBEND can be used on all common desktop FDM or FFF technology 3D printers.
Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly
GLASSBEND can be used on all common desktop FDM or FFF technology 3D printers.
Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly
사양
속성 | 값 |
|---|---|
| Material Type | Food Contact |
| Printing Technology | FDM |
| Machine Specific | No |
| Colour | Transparent |
| For Use With | Common Desktop 3D Printers |
| Weight | 300g |
| Diameter | 1.75mm |
| Printing Material | GLASSBEND |