Pneumatic Grippers

Pneumatic grippers are devices designed to hold an object using pneumatic, electric or hydraulic operated jaws or fingers. Grippers can be used as single devices or as a part of pick and place, manufacturing systems. Grippers can be used to pick up/hold various size objects from very small items such as semiconductors to very large items like car chassis or engines. Grippers are frequently added to industrial robots in order to allow robots interactions with objects.

Grippers can be divided into 2 main categories by type of holding objects:
• External – the simplest and most popular method of holding objects. When the gripper jaws close, the closing force of the gripper holds that object.
• Internal – When the access to object’s exterior is required then an internal grip is necessary. Jaws or finger hold the object from the centre. In this case, the opening force of the gripper is used to hold the object.

What to consider when choosing the gripper:
• Shape , orientation and dimensional variation - If the object has two opposing flat surfaces, then 2 jaw parallel gripper is desired since it can handle some dimensional variation. Jaws can also be designed to handle cylindrical objects with the 2 jaw concept. Keep in mind that a retention or encompassing grip requires much less force.
• Weight - Grip force must be adequate to secure the object while the desired operation is performed on the object. The type of jaw design must be part of the force requirement. Keep in mind that you should add a safety factor to the amount of force that you select and air pressure is a factor to keep in mind.
• Accessibility- This applies both to the work being performed on the object and the amount of room for the gripper jaws. If the work is to the exterior of the object then it may require an internal grip. Angular grippers are usually less expensive but require additional space for jaw movement.
• Environmental - Harsh environment or clean room applications require grippers designed for those purposes.
• Retention of the Object - When air pressure is lost, the gripper will relax its grip on the object and the object may be dropped. There are spring assist grippers designed for this type application.

...
Read more Read less

검색 필터링

총 101개 제품 중 1번째-20번째 제품을 조회 중
한장내 검색 결과 수
제품설명 단가 Manufacturer Series Action Number of Fingers Gripping Type Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Port Connection Weight Size Type
RS 제품 번호 245-0003
제조사 부품 번호MHS3-20D
제조사SMC
₩736,914.95
Each
수량
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 100g -
RS 제품 번호 700-7345
제조사 부품 번호MHZ2-16D
제조사SMC
₩515,686.55
Each
수량
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 115g -
RS 제품 번호 478-056
제조사 부품 번호MHY2-16D2
제조사SMC
₩442,480.05
Each
수량
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 150g -
RS 제품 번호 700-7288
제조사 부품 번호MHF2-16D1
제조사SMC
₩886,547.30
Each
수량
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 445g -
RS 제품 번호 700-7281
제조사 부품 번호MHF2-20D
제조사SMC
₩916,814.15
Each
수량
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 645g -
신제품
RS 제품 번호 203-1503
제조사 부품 번호DHPS-20-A-NC
제조사Festo
₩803,682.75
Each
수량
DHPS-20-A-NC Double 2 Parallel 8 bar - - - - -
RS 제품 번호 700-7310
제조사 부품 번호MHS3-25D
제조사SMC
₩778,248.80
Each
수량
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 140g -
RS 제품 번호 196-4474
제조사 부품 번호MHSH3-50D
제조사SMC
₩1,227,161.35
Each
수량
MHSH3 Double 3 Parallel 0.6 MPa - - - 970g Standard
RS 제품 번호 768-1628
제조사 부품 번호MHL2-20D
제조사SMC
₩777,980.65
Each
수량
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 1kg -
RS 제품 번호 768-1621
제조사 부품 번호MHW2-32D
제조사SMC
₩1,130,669.20
Each
수량
MHW2 Double 2 Angle 0.7 MPa - - Rc 1/8 910g -
RS 제품 번호 700-7314
제조사 부품 번호MHS3-32D
제조사SMC
₩648,211.55
Each
수량
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 237g -
RS 제품 번호 700-7320
제조사 부품 번호MHY2-16D
제조사SMC
₩434,748.65
Each
수량
MHY2 Double 2 Angle 0.6 MPa - - M5 x 0.8 150g -
신제품
RS 제품 번호 203-1504
제조사 부품 번호DHWS-40-A
제조사Festo
₩757,612.10
Each
수량
DHWS-40-A Double 2 Angle 8 bar - - - - -
신제품
RS 제품 번호 203-1531
제조사 부품 번호DHPS-35-A
제조사Festo
₩1,065,787.75
Each
수량
DHPS-35-A Double 2 Parallel 8 bar - - - - -
RS 제품 번호 233-2113
제조사 부품 번호MHL2-10D
제조사SMC
₩604,242.70
Each
수량
MHL2 Double 2 Parallel 0.6 MPa - - M5 x 0.8 280g -
신제품
RS 제품 번호 203-1656
제조사 부품 번호DHRS-32-A
제조사Festo
₩942,809.20
Each
수량
DHRS-32-A Double 2 Radial 8 bar - - - - -
신제품
RS 제품 번호 203-1482
제조사 부품 번호DHDS-16-A
제조사Festo
₩815,075.25
Each
수량
DHDS-16-A Double 3 - 8 bar - - - - -
RS 제품 번호 841-2372
제조사 부품 번호MHZ2-40D
제조사SMC
₩1,243,820.75
Each
수량
MHZ Double 2 Parallel 0.1 → 0.7 MPa 0.7MPa Not Cushioned M5 x 0.8 1.3kg -
RS 제품 번호 196-4475
제조사 부품 번호MHSL3-50D
제조사SMC
₩988,346.65
Each
수량
MHSL3 Double 3 Parallel 0.6 MPa - - M5 930g Standard
RS 제품 번호 700-7317
제조사 부품 번호MHS3-16D
제조사SMC
₩669,970.45
Each
수량
MHS3 Double 3 Parallel 0.6 MPa - - M3 x 0.5 60g -