Cutters

Cutters are handheld tools designed for cutting a variety different materials, such as wires, and other smaller objects potentially too small to be worked on by hand. Typically consisting of two levers connected closer to one end by a fulcrum, with the shorter end forming the jaw, cutters come in a variety of types and sizes. The three basic types are locking, adjustable and non-adjustable.

In order to ensure user comfort, most models of cutters will have insulated handles, allowing you to be protected whilst working and providing a firm and comfortable grip. In addition to standard insulation or cushioning, some cutters will be VDE-insulated to protect the user when working with electrical equipment.

What are cutters used for?

While the name may be fairly clear, some variations of cutters can also be used to perform other actions. For example, linesmans cutters also have a small flat section along the jaw for gripping objects as well as their cutting surface. The application will dictate which is the best type of cutter for you to use.

Types of Cutters

Used by professionals and DIYers alike to cut wires effectively, there are many types of cutters designed for specific applications:

  • Diagonal cutters, also known as side cutters or side cutter pliers, are ideal for gripping, splicing or cutting wires, as well as stripping wire insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife or scissors.
  • End cutters are also known as nippers and are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat-bladed head, which allows for a cut close against the surface without digging into it.
  • Wire rope cutters are used for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable before performing a clean cut.
  • Snipe nose or needle nose cutters are designed to hold fine objects and cut them cleanly without applying pressure to the wider area, which larger cutters may do and cause damage.
  • Cable cutters or wire cutters are most commonly used in electrical applications and are designed specifically to be used with cables and wires. While most have some form of covered handle for user comfort, it is important not to confuse plastic or rubber coatings with electrical insulation.
  • Linesmans cutters are popular in communications and electrical tasks. They have a short gripping surface toward the tip of the jaw, and a cutting surface extends back to the fulcrum. They are ideal for cutting leads or stripping insulation.

For more information on cutters, cutter types and best practices, read our comprehensive guide here.


...
Read more Read less

검색 필터링

총 619개 제품 중 1번째-20번째 제품을 조회 중
한장내 검색 결과 수
제품설명 단가 Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Hard Wire Cutting Capacity Iron Wire
RS 제품 번호 158-5338
제조사 부품 번호70 06 160
제조사Knipex
₩44,455.55
Each
수량
- - Side Cutters 160 mm - - - - - - - - - -
RS 제품 번호 254-232
제조사 부품 번호2233D 160
제조사Bahco
₩50,469.55
Each
수량
- - - 160 mm - - - - - - - - - -
RS 제품 번호 733-867
제조사 부품 번호2128G-160IP
제조사Bahco
₩62,899.00
Each
수량
- - Side Cutters 160 mm - - - - - 2.0mm - - - -
RS 제품 번호 606-490
제조사RS PRO
₩31,114.70
Each
수량
- - Electronic Cutters 138 mm - - - - - 1.3mm 1.3mm - - -
RS 제품 번호 864-0772
제조사RS PRO
₩18,880.55
Each
수량
- - Electronic Cutters 114 mm 7.0mm - - Yes HCS - - - - -
RS 제품 번호 847-3784
제조사RS PRO
₩27,633.40
Each
수량
- - Electronic Cutters 114 mm - - - - Chrome Vanadium Steel - - - - -
RS 제품 번호 910-7172
제조사 부품 번호T3887
제조사CK
₩22,901.25
Each
수량
- - Electronic Cutters 136 mm - - - Yes - - - - - -
RS 제품 번호 606-484
제조사RS PRO
₩25,847.80
Each
수량
- - Diagonal Cutters 133 mm - - - - - 1.0mm - - - -
RS 제품 번호 248-1934
제조사 부품 번호72 01 140
제조사Knipex
₩99,406.15
Each
수량
- - Diagonal Cutter 140 mm - - - - - - - - - -
RS 제품 번호 359-4687
제조사 부품 번호2101G-125
제조사Bahco
₩60,549.20
Each
수량
- - Side Cutters 125 mm - - - - - 3.5mm - - - -
RS 제품 번호 541-6551
제조사RS PRO
₩43,133.40
Each
수량
- - Flush Cutters 162 mm - - - - - - - - - -
RS 제품 번호 875-5792
제조사RS PRO
₩27,231.95
Each
수량
- - Diagonal Cutters 140 mm - - - - Steel 1.8mm - - - -
RS 제품 번호 864-0785
제조사RS PRO
₩20,473.95
Each
수량
- - Electronic Cutters 127 mm 8.0mm - - Yes HCS - - - - -
RS 제품 번호 497-007
제조사RS PRO
₩53,135.55
Each
수량
- - Diagonal 180 mm - Yes - - Steel 2.7mm - - - -
RS 제품 번호 847-2949
제조사RS PRO
₩30,601.65
Each
수량
- - Electronic Cutters 123 mm 19.0mm - - Yes - 1.02mm - - - -
RS 제품 번호 847-2951
제조사RS PRO
₩31,353.40
Each
수량
- - Electronic Cutters 148 mm 24.0mm - - Yes - 2.0mm - - - -
RS 제품 번호 705-5975
제조사 부품 번호95 36 280
제조사Knipex
₩581,808.00
Each
수량
- - Ratchet Cable Cutter 280 mm - Yes - - - 52.0mm - - - -
RS 제품 번호 755-4116
제조사 부품 번호425.MT
제조사Facom
₩122,419.00
Each
수량
- - Super Full Flush 110 mm 13.0mm - - - - 1.3mm - - - -
RS 제품 번호 158-5417
제조사 부품 번호95 16 165
제조사Knipex
₩81,990.35
Each
수량
- - Flush Cutters 165 mm - Yes - - - 15.0mm - - - -
RS 제품 번호 524-3527
제조사 부품 번호79 32 125
제조사Knipex
₩91,401.95
Each
수량
- - - - - - - - - - - - - -