Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Read more Read less

검색 필터링

총 149개 제품 중 1번째-20번째 제품을 조회 중
한장내 검색 결과 수
제품설명 단가 Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS 제품 번호 541-7223
제조사RS PRO
₩57,844.45
Each
수량
- 5 → 32 mm 10 - Wad
RS 제품 번호 626-1497
제조사RS PRO
₩50,539.30
Each
수량
40 mm, 50 mm 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm 6 - Drift
RS 제품 번호 510-153
제조사 부품 번호DX620
제조사Starrett
₩53,264.20
Each
수량
89 mm 1/8 → 3/8 in 5 - Pin
RS 제품 번호 282-782
제조사 부품 번호J2
제조사Stanley Proto
₩146,289.00
Each
수량
4 4/8 → 6 in 1/4 → 7/16 in 12 - Pin
RS 제품 번호 220-0662
제조사 부품 번호249.GPB
제조사Facom
₩92,595.45
1 Set
Set(s)
55 mm 3 → 8 mm 5 - Anti-Vibration
RS 제품 번호 381-4903
제조사RS PRO
₩60,009.80
1 Set
Set(s)
4 in 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 7/32 in 8 - Parallel Pin
RS 제품 번호 547-638
제조사 부품 번호351BRS
제조사Eclipse
₩8,545.15
Each
수량
100 mm 4 mm 1 90° Fine Machine Point
RS 제품 번호 282-805
제조사 부품 번호J46
제조사Stanley Proto
₩411,565.30
Each
수량
4 3/4 → 10 in 3/16 → 7/8 in 26 - Pin
RS 제품 번호 545-389
제조사 부품 번호E171RS
제조사Eclipse
₩41,109.10
Each
수량
120 mm 4 mm 1 - Automatic
RS 제품 번호 456-3640
제조사RS PRO
₩45,091.05
Each
수량
150 mm 3 → 10 mm 6 - Parallel Pin
RS 제품 번호 733-744
제조사 부품 번호351ARS
제조사Eclipse
₩11,518.05
Each
수량
100 mm 3.2 mm 1 90° Fine Machine Point
RS 제품 번호 733-738
제조사 부품 번호351WRS
제조사Eclipse
₩39,545.15
1 Set
Set(s)
100 mm 1/4 → 1/8 in 4 - Centre
RS 제품 번호 494-076
제조사 부품 번호4-18-299
제조사Stanley
₩64,369.95
Each
수량
Starter Punch: 140; Centre Punch: 101; 114; Pin Punch: 152; Cold Chisel: 141; 152; 171 mm 1.5 → 6 mm 12 - Pin
RS 제품 번호 452-9634
제조사 부품 번호217.GJ1
제조사Facom
₩200,083.30
1 Box of 1
Box(es)
60; 40; 100; 20; 20 mm Steel Tips: 10; 12; 14; 16; 18: Brass Tips: 12; 16; 20: Polyamide Tips: 12; 16; 20: Brass Tips For Extension: 12; 16; 18; Polyamide Tip For Extension: 12; 16; 18 mm 19 - Anti-Vibration
RS 제품 번호 423-2627
제조사RS PRO
₩19,545.50
1 Set
Set(s)
4 in - 3 - Centre
RS 제품 번호 505-8688
제조사RS PRO
₩45,477.00
Each
수량
150 mm - 6 - Parallel Pin
RS 제품 번호 875-4764
제조사RS PRO
₩48,883.90
Each
수량
- 1/16 to 7/32 in 8 - Parallel Pin
RS 제품 번호 381-4919
제조사RS PRO
₩53,374.25
1 Set
Set(s)
205 mm 3.2 mm, 4.8 mm, 6.3 mm, 8 mm, 9.5 mm 5 - Parallel Pin
RS 제품 번호 290-5109
제조사RS PRO
₩35,614.35
Each
수량
139 mm 3 mm 1 20° Automatic
RS 제품 번호 494-086
제조사 부품 번호4-18-226
제조사Stanley
₩46,084.60
Each
수량
152 mm 1.5 → 3 mm 6 - Pin