Current Transformers

Current transformers (CT) are devices that are used to transform the current from a high current into a lower current so that the power can then be measured and controlled. The transformers consist of a core, a primary and a secondary winding. When an alternating current flows through the primary winding, a magnetic flux is created which then induces an alternating current in the secondary winding. This alternating current is proportional to the current in its primary. Current transformers are also known as a "step-down transformers". Once the current has been reduced it can be safely monitored and measured using an ammeter.


Current transformers can perform circuit control and perform roles for safety protection and current limiting.


Current transformers are found in:


  • Generating stations,

  • Electrical substations

  • Commercial electric power distribution.

Types of Current Transformers


Toroidal Current Transformer - These transformers are shaped like a doughnut they do not contain a primary winding. Instead, the line that carries the current flowing in the network is threaded through a window or hole in the toroidal transformer. Toroidal transformers offer high efficiency with minimal excess noise and little excess leakage inductance.


Wound Current Transformer - The transformers primary winding is physically connected in series with the conductor that carries the measured current flowing in the circuit. The magnitude of the secondary current is dependent on the turns ratio of the transformer.


Bar-type Current Transformer – This type of current transformer uses the actual cable or bus-bar of the main circuit as the primary winding, which is equivalent to a single turn. They are fully insulated from the high operating voltage of the system and are usually bolted to the current carrying device.


...
Read more Read less

검색 필터링

총 13개 제품 중 1번째-13번째 제품을 조회 중
한장내 검색 결과 수
제품설명 단가 Current Ratio Inner Diameter Transformer Type Overall Height Overall Width Overall Depth Input Current Output Current Minimum Temperature Maximum Temperature Dimensions For Use With Mounting Type Series
RS 제품 번호 832-9857
제조사 부품 번호L01-8001
제조사Alttec
₩16,428.659
Each
수량
50:5 21.5mm Clip Fit 65mm 45mm 30mm - - - +40°C 65 x 45 x 67 mm - - -
RS 제품 번호 832-9854
제조사 부품 번호L01-8000
제조사Alttec
₩15,254.356
Each
수량
50:1 21.5mm Clip Fit 65mm 45mm 30mm - - - +40°C 65 x 45 x 67 mm - - -
RS 제품 번호 832-9863
제조사 부품 번호L01-8004
제조사Alttec
₩16,056.531
Each
수량
150:1 21.5mm Clip Fit 65mm 45mm 30mm - - - +40°C 65 x 45 x 67 mm - - -
RS 제품 번호 832-9841
제조사 부품 번호L01-8508
제조사Alttec
₩26,589.058
Each
수량
150:5 28mm Clip Fit 78.5mm 61mm 40mm - - - +40°C 78.5 x 61 x 72 mm - - -
RS 제품 번호 832-9845
제조사 부품 번호L01-8510
제조사Alttec
₩26,589.058
Each
수량
250:5 28mm Clip Fit 78.5mm 61mm 40mm - - - +40°C 78.5 x 61 x 72 mm - - -
RS 제품 번호 832-9860
제조사 부품 번호L01-8003
제조사Alttec
₩16,056.531
Each
수량
100:5 21.5mm Clip Fit 65mm 45mm 30mm - - - +40°C 65 x 45 x 67 mm - - -
RS 제품 번호 832-9839
제조사 부품 번호L01-8501
제조사Alttec
₩31,374.597
Each
수량
50:5 28mm - 78.5mm 61mm 72mm - - - +40°C - - - -
RS 제품 번호 832-9851
제조사 부품 번호L01-8002
제조사Alttec
₩15,254.356
Each
수량
100:1 21.5mm Clip Fit 65mm 45mm 30mm - - - +40°C 65 x 45 x 67 mm - - -
RS 제품 번호 832-9835
제조사 부품 번호L01-8500
제조사Alttec
₩28,236.847
Each
수량
40:5 28mm Clip Fit 78.5mm 61mm 40mm - - - +40°C 78.5 x 61 x 72 mm - - -
RS 제품 번호 832-9867
제조사 부품 번호L01-8005
제조사Alttec
₩16,056.531
Each
수량
150:5 21.5mm Clip Fit 65mm 45mm 30mm - - - +40°C 65 x 45 x 67 mm - - -
RS 제품 번호 832-9848
제조사 부품 번호L01-8506
제조사Alttec
₩26,589.058
Each
수량
100:5 28mm Clip Fit 78.5mm 61mm 40mm - - - +40°C 78.5 x 61 x 72 mm - - -
RS 제품 번호 832-9879
제조사 부품 번호L01-8009
제조사Alttec
₩16,056.531
Each
수량
250:5 21.5mm Clip Fit 65mm 45mm 30mm - - - +40°C 65 x 45 x 67 mm - - -
RS 제품 번호 832-9876
제조사 부품 번호L01-8007
제조사Alttec
₩15,254.356
Each
수량
200:5 21.5mm Clip Fit 65mm 45mm 30mm - - - +40°C 65 x 45 x 67 mm - - -